Wellmade’s Euro Form Formwork System
Wellmade’s Euro Form Formwork Steel Frames are made from 450 High Strength Special Steel Structure. It is the Highest Grade of the Steel Scaffolding and Formwork Structure in Construction. 450 High Strength Steel Grade Ensure Our Euro Form Take Heavy Weight from the Concrete and Shuttering. Following is Wellmade’s Euro Form Panel Test Technical Data. You can choose whether it is suited for your concrete forms.
According to the test result, Wellmade’s Euro Form Formwork is able Use in All Types of Civil, Commerical, and Industrial Formwork Construction.
You can choose the surface plywood of the euro form panels according to your request. There are different types of plywood used in the euro form formwork panels include:
- Film Face Plywood
- Bamboo Plywood
According to the load capacity requirement, the plywood thickness would be 12mm to 25mm. Plywood Frame Secures Safety Load Concrete Mixture at 40 KN/m2 and More.
Wellmade’s Euro Form Formwork System is Light In Weight. Steel Ply Panel Form System. It is Easy to Handle. More than that, the steel plywood formwork is easy to assemble with simple formwork accessories of crossed wedge pins. Thus, Wellmade’s Euro Form Saves Your Formwork Concrete Labor Cost and Time.
In addition, Welmade’s Euro Formwork is able to be compatible with all formwork systems and shuttering work scaffolding
Features of Wellmade’s Euro Form Formwork
- Steel Frame of Wellmade’s Euro Form is Powder Coated Finishing for Corrosion Resistance.
- Plywood Panel of Wellmade’s Euro Form is Film Faced Plywood Support Repeat Work in Concrete
Film Faced Plywood Euro Form Panel
Euro Form Inside Corner
|Inside Corner Connected Euro Form Panels at Right Angle From Inner Side of Wall, Binds Panels by Wedge Pins|
Euro Form Formwork Outer Corner
|Out Corner Connected Euro Form System at Right Angle From Out Side of Wall, Binds Panel Modules by Wedge Pins|
Euro Formwork Formwork Accessories
Wedge pins Connected Between The Euro Form Panels In Cross Directions. Easy Application to Formwork Workers.
Euro Form Formwork Rivet Pipe Galvanized O.D 48.6mm
Steel Scaffolding Tube with Rivet at both Ends for Korean and Japanese Standard.
Inner Joint Pin for Rivet Scaffolding Steel Pipe
Formwork D Cone & P Cone
Steel Round Pipe for Euro Form System
Steel Pipe Support for Euro Form
|Shoring Jack V-1||1.8-3.15m||13.5|
|Shoring Jack V-2||2-3.45m||13.5|
|Shoring Jack V-3||2.4-3.65m||14.55|
|Shoring Jack V-4||2.7-3.95m||14.95|
|Shoring Jack V-5||4-4.8m||19.3|
|Shoring Jack SS-1||3.2-5.85m||19.45|